Thermometers TERME'KS LT-300, LTI, ExT-01, etc.

Thermometers for petroleum products are designed to measure the temperature of oil and petroleum products during their commercial accounting. They are available in three versions, differing in the design of the sensors.
Modifications:
The ExT-01/1 sensor is made in the form of a stainless steel probe without an extension cable.
The EcT-01/2 sensor is designed as a fully submersible stainless steel probe with a cable up to 15 meters long.
The EcT-01/3 sensor is designed as a fully submersible stainless steel probe with a cable up to 30 meters long and a cable winding device.

Laboratory thermometers - can replace most mercury laboratory thermometers.
The measuring range is -50...+300 °C. Resolution 0.01 °C, accuracy ±0.05 °C.
Models:
LT-300-H and LT-300-H-TS (not intended for measurements in aggressive environments),
LT-300-T (Titanium alloy sensor can be used for measurements in moderately aggressive environments),
LT-300-F (Stainless steel sensor with fluoroplast coating designed for measurements in aggressive environments).

The LTI-M electronic thermometer.
The measurement range is -196...+150 °C.
Resolution 0.01 °C, accuracy class B according to GOST 6651.
The stainless steel sensor is not designed for measurements in aggressive environments.
Electronic thermometer LTI-P
The measuring range is 0...+500 °C.
Resolution 0.01 °C, accuracy class B according to GOST 6651.
The stainless steel sensor is not designed for measurements in aggressive environments.

Laboratory thermometers of the LTA series are designed to be used as a 3-digit reference for the verification and calibration of working temperature measuring instruments and for other metrological work.
The range of measured temperatures, °C:

• for sensors of type H, HT .................................. from minus 50 to 300
• for sensors of type NF, V, E, K.......................... from minus 50 to 200
• for sensors of type M, MT ............................... from minus 196 to 300
• for MF type sensors ................................... from minus 196 to 200
• for sensors of type P ........................................ from minus 70 to 500

Reference resistance thermometers ETS‑100 are reference thermometers of the 3rd category and are designed for verification of working temperature measuring instruments according to the verification scheme of GOST 8.558.
They can be used for accurate temperature measurements in conjunction with a turcon.
Models: ETS-100/1 (-196...+660 °C), ETS-100/2 (-196...+419 °C).

An external VT-D temperature sensor is necessary to accurately maintain the temperature in external objects. The diameter and length of the submerged part are 3 and 240 mm, respectively. The nominal static characteristic of Pt1000.

The LT-300-A adapter is used to connect the LT-300 thermometers to a personal computer via a USB interface.
This is the "native" device for the ThermoChart program.
The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system for data exchange.

The LT-DP spring holder for LT‑300 or LTTI electronic thermometers allows you to simply and securely mount the temperature sensor on the walls of laboratory dishes so that it does not touch either the bottom or the wall.

The LT-DSH14 plug holder, made of Teflon, will allow you to securely mount the temperature sensor of the LT-300 or LTI electronic thermometers in 14/23 laboratory glassware grinders.

The LTA-4DP spring holder for LTA electronic thermometers with a 4 mm diameter sensor allows you to simply and securely mount the temperature sensor on the walls of laboratory dishes so that it does not touch either the bottom or the wall.

The LTA-4DSH14 plug holder, made of Teflon, will allow you to securely mount the temperature sensor of LTA electronic thermometers with a diameter of 4 mm in laboratory glassware grinders with a size of 14/23.

The LTA-KS thermometer case is designed for carrying LTA thermometers between measurement locations. It is especially convenient for the LTA-K thermometer, as it allows you to place not only an electronic unit, but also a temperature sensor.

• Термометры электронные ЛТИ. Описание типа средства измерения.
• Термометры электронные ExT-01. Описание типа средства измерения.
• Термометры лабораторные электронные LTA. Описание типа средства измерения.
• Термометры лабораторные электронные ЛТ-300. Описание типа средства измерения.